Crack energy density in arbitrary direction for piezoelectrics and its characteristic features in electromechanical mixed mode crack

The concepts of crack energy density (CED) and its derivatives in arbitrary direction were established for piezoelectric material and, keeping their application to mixed mode fracture in mind, the characteristic features of them as fracture parameters were investigated based on the approximate equations for CED and its derivatives. That is, CED and its derivatives in arbitrary direction are defined first and separation into their each mode contribution is made. Subsequently, path independent integral expressions of them are derived, and then using them, approximate equations of each mode contribution of CED are obtained concretely for the case where linear singular solution is known. The resulting equations are then used to investigate the effects of electric field and electrical boundary condition on CED and its derivatives. An infinite piezoelectric plane with a crack inclined with respect to the poling direction is considered as a numerical example. Mode I contribution of mechanical CED is mainly employed as a possible fracture parameter for the study and it was shown that applied electric field significantly influences on fracture parameters especially for the impermeable crack perpendicular to the poling direction. The effect of electric field has the tendency to decrease as crack inclination angle increases. It was also found that, even for the impermeable crack perpendicular to the poling direction, crack propagation could be deviated from self-similar direction under a strong negative electric field, and this fact is qualitatively consistent with an existing experimental observation. For the ideally sharp crack with no width, impermeable and Hao and Shen type boundary conditions are admissible showing qualitative agreement with experimental results, but exact boundary condition is not suitable and finally consistent with permeable boundary condition.