Degradation of polydispersed poly(image-lactic acid) to modulate lactic acid release

Polydispersed poly(image-lactic acid) (PLLA) membranes comprised of blends of monodispersed PLLA of weight average molecular weight of 82500 and 7600 were fabricated to investigate the effect of polydispersity on degradation characteristics. The PLLA blends exhibited large spherulites of high molecular weight chains embedded in a low molecular weight matrix. During degradation in phosphate buffer at pH 7.4 and 37 °C for 28 d, the release rate of lactic acid increased as the percentage of the low molecular weight component in the blend was increased. For low molecular weight compositions larger than 50%, voids were created in the degrading blends due to the degradation of low molecular weight chains and the concurrent dissolution of lactic acid, and also the release of undegraded particles of high molecular weight. These studies demonstrate the feasibility of modulating lactic acid release during in vivo degradation of PLLA implants by adjusting the polymer polydispersity.