Physiological strains induce differentiation in human osteoblasts cultured on orthopaedic biomaterial

We have developed an in vitro mechanical stretching model of osteoblastic cells cultured on metallic biomaterials in order to study the effects of mechanical strain on osteointegration of orthopaedic implants. Titanium alloy discs coated with alumina or hydroxyapatite were used as substrates. Three Dynacell® devices were especially designed to apply cyclic strains on rigid biomaterials. The regimen (600 μ strains, 0.25 Hz) was defined on the basis of physiological data and estimated deformation on hip stem prostheses. The performances of these apparatus were reproducible and provided controlled deformations. Human osteosarcoma cell line MG-63, human osteoblasts obtained from primary cultures and ROS 17/2.8 rat osteosarcoma cells were used as cell models. Cell behaviour was assessed in terms of growth and alkaline phosphatase (ALP) activity by in situ assays for two regimens: 15-min deformations repeated three times a day to mimic rehabilitation exercises and 24-h continuous deformations. We demonstrated that continuous deformation did not affect the growth and ALP activity of MG-63 cells, in contrast with sequential deformations which had no effect on cell number, but which stimulated ALP activity after 5 days of stretching. This sequential regimen can also modify the behaviour of human bone-derived cells resulting in increased proliferation after 5 days and stimulation of ALP activity after 15 days. ROS 17/2.8 rat osteosarcoma cells submitted to sequential deformations responded faster than other cell lines by increasing their ALP activity only after 1 day of stretching. Like MG-63 cells, proliferation of the ROS 17/2.8 rat osteosarcoma cell line was not affected by sequential deformations. This study suggests that short, repeated deformations defined to mimic rehabilitation exercises recommended after prostheses implantation are more likely to exert beneficial effects on implanted bone than continuous strains.