Title of article :
BTEX determination in water matrices using HF-LPME with gas chromatography–flame ionization detector Original Research Article
Author/Authors :
A. Sarafraz-Yazdi، نويسنده , , A.H. Amiri، نويسنده , , Z. Es’haghi، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2008
Abstract :
In the present work, a sample pre-treatment technique for the determination of trace concentrations of benzene, toluene, ethyl benzene and xylene (BTEX) in aqueous samples has been developed and applied to analysis of the selected analytes in environmental water samples. The extraction procedure is based on coupling polypropylene hollow-fiber liquid phase microextraction (HF-LPME) with gas chromatography by flame ionization detection (GC-FID). The effective parameters such as organic solvent, extraction time, agitation speed and salting effect were investigated. Good reproducibilities of the extraction performance were obtained, with the RSD values ranging from 2.02 to 4.61% (n = 5). The method provided 41.47–128.01 fold preconcentration of the target analytes. The limits of detections for the BTEX were in the range of 0.005–03 μg ml−1. In addition, sample clean-up was achieved during LPME due to the selectivity of the hollow fiber, which prevented undesirable large molecules from being extracted. Real samples (River and waste waters) containing BTEX were examined using this method with good linearity and precision (RSDs most lower than 6.00%, n = 5). All experiments were carried out at room temperature, 22 ± 0.5 °C.
Keywords :
Water sample , gas chromatography , Hollow-fiber liquid phase microextraction (HF-LPME) , BTEX
Journal title :
Chemosphere
Journal title :
Chemosphere