Author/Authors :
Apostolos G. Vlyssides، نويسنده , , Cleanthes J. Israilides، نويسنده ,
Abstract :
This paper describes an electrochemical treatment and detoxification of tannery waste liquors (TWL). In this technique, TWL was passed through an electrolytic cell using a Ti/Pt anode and a stainless steel 304 cathode. Owing to the strong oxidizing potential of the chemicals produced (chlorine, oxygen, hydroxyl radicals and other oxidants) the organic and inorganic pollutants (ammonia, sulfides and chromium) were wet oxidized to carbon dioxide, nitrogen oxides and sulfur dioxide. In addition, chromium was precipitated as Cr2(SO4)3. Experiments were run in a batch, laboratory-scale, pilot-plant, and the results are reported herein. After 30 min and 3 h of electrolysis at 0.26 A cm−2, 45° C and pH 9, total chemical oxygen demand (COD) was reduced by 52 and 83% and biochemical oxygen demand (BOD5) was reduced by 35 and 66%, respectively. Additionally, total suspended solids (TSS) were reduced by 8.6 and 26%, total phenolic compounds were reduced by 95.6 and 99.4%. Ammonia, sulfides and soluble chromium were reduced by 100% in both cases, while the mean anode efficiency was 81 g h−1 A−1 m−2 and 1.9 g h−1 A−1 m−2. Also, the mean energy consumption was 4.8 kwh kg−1 of COD reduced and 200 kwh kg−1 of COD reduced for 0.5 and 3 h, respectively. These results strongly indicate that this electrolytic method of total oxidation of TWL cannot be cost effective for wide use. However, it can be used as an effectivepretreatment stage for detoxification of the wastewater, owing to great efficiency especially with respect to COD and toxicity (phenolics) reduction.
Keywords :
chromium(III) removal. , oxidation of phenols , Tannery waste liquors , electrochemical treatment