Ex situ bioremediation of pyrene contaminated soil in bio-slurry phase reactor operated in periodic discontinuous batch mode: Influence of bioaugmentation

Ex situ treatment of simulated pyrene-contaminated soil was studied in bio-slurry phase reactors operated in periodic discontinuous batch mode under anoxic–aerobic–anoxic–anoxic microenvironment. Experiments were performed in six different bio-slurry phase reactors (retention time of 120 h; soil loading rate of 20 kg soil/m3-day; operating temperature at 28±2 °C) by varying substrate concentration (substrate loading rate (SLR), 0.12, 0.24 and 0.36 g pyrene/kg soil-day) and bioaugmentation application (domestic sewage inoculum; CFU—2×106). The performance of slurry phase reactors was found to be dependent on the applied SLR and application of bioaugmentation (domestic sewage as augmented inoculum). Control reactor (killed control) showed only 6% of pyrene degradation while the non-augmented reactor showed an efficiency of 34% (substrate degradation rate (SDR)—0.0165 g pyrene/kg soil-day). In the case of augmented reactors, the system operated with low SLR showed a pyrene degradation efficiency of almost 90% (SDR—0.04 g pyrene/kg soil-day) and the reactor with high SLR showed 50% (SDR—0.025 g pyrene/kg soil-day) of pyrene degradation indicating the dependence of performance on the substrate concentration. Colony forming units (CFUs) variation was in good agreement with the performance of the reactors with respect to pyrene degradation. On the whole, pyrene degradation rate was greater in the augmented reactors compared to non-augmented reactors.