A geometric approach to determine adsorption and desorption kinetic constants

A geometric method based on Langmuir kinetics has been derived to determine adsorption and desorption kinetic constants. In the conventional procedure, either the adsorption kinetic constant (kac) or desorption kinetic constant (kdc) is found from kinetic experiments and the other is calculated by their correlation with the equilibrium constant, i.e, kdc=Kcon/kac, where Kcon has been known from equilibrium studies. The determined constants (Kcon, kac, kdc), if based only on the conventional procedure, may not be accurate due to their mathematical dependence. Therefore, the objectives of this study are applying a geometric approach to directly determine Langmuir kinetic constants and describe adsorption behavior. In this approach, both adsorption kinetic constant (kag) and desorption kinetic constant (kdg) are obtained only from data of kinetic experiments, and a geometric equilibrium constant (Kgeo) is calculated by Kgeo=kag/kdg. The deviation between Kgeo and Kcon can prove the accuracy of kag and kdg which were determined by this method. This approach was applicable to selenate, selenite and Mg2+ adsorption onto SiO2 regardless of whether the adsorbate formed inner- or outer-sphere complexes. However, this method showed some deviation between Kcon and Kgeo for Mn2+ adsorption because of the formation of surface Mn(II)-hydroxide clusters, which was inconsistent with the basic assumption of this method of monolayer adsorption.