Materials selection for a dry atmospheric mercury deposits sampler

In order to develop a sampler for measuring dry deposition rates for atmospheric mercury, suitable materials are needed that neither adsorb nor release mercury. In this paper, four materials (polyvinyl chloride (PVC), acrylonitrile-butadiene-styrene (ABS), Teflon and glass) were tested. Each of the materials was placed in a beaker containing mercuric solution under varied conditions for pH, preservative concentration, initial mercuric concentration, temperature, acid type and contact time of the material. The concentrations of the mercuric solutions were determined using the cold-vapor atomic absorption (CVAA) technique. The experimental results show that glass has the lowest absolute net adsorption rates (NARs) of 0.026–1.13 μg/m2 among the materials tested. Teflon, PVC and ABS have NARs ranging from 0.54 to 10.4 μg/m2 over an adsorption duration of one or two weeks. ABS has significantly higher adsorption rates for mercury than PVC and Teflon, indicating its inappropriateness as the material for building the sampler. Teflon and PVC will be the materials of choice for the sampler. The experimental results can also be used in establishing appropriate sampling conditions in the field.