Toxic by-products from the combustion of Kraft lignin

Lignin samples, sub-product in the Kraft process of cellulose from eucalyptus wood, were burnt in a laboratory scale furnace at different residence temperatures and with distinct fuel-rich atmospheres. The yields of CO, CO2, eight light hydrocarbons (methane, ethylene, ethane, propylene, acetylene, butane, etc.) and 60 semi-volatile + volatile compounds (benzene, toluene, ethylbenzene, styrene, indene, naphthalene, dibenzofuran, phenanthrene, chrysene, etc.) were determined, with nominal reactor temperatures between 800 and 1100 °C and residence times of the volatiles evolved and formed between 4 and 7 s. The collection of the gases and volatiles evolved was carried out with a Tedlar bag and by XAD-4 resin respectively, comparing the data obtained in both cases. The emission factor (mg/kg) of the CO was between 2500 and 90 000, and under the poor-oxygen atmosphere, the emission factors of many by-toxic products were greater than 100 mg/kg. A pyrolysis run was also performed, obtaining emission factors between 30 and 3000 mg/kg, facilitating its identification. The behaviour of different compounds in the combustion runs was discussed considering three groups in accordance with their stability vs. oxygen, and two groups vs. temperature.