Supercritical fluid extraction of polycyclic aromatic hydrocarbons from marine sediments and soil samples

Supercritical fluid extraction (SFE) was used to extract polycyclic aromatic hydrocarbons (PAH) from a certified sample of marine sediment. This sample contains a great number of organic pollutants that are present in low concentrations. The extractions were carried out at 50 and 80 °C, at a pressure varying from 230 to 600 bar and using CO2 in the supercritical phase and the effect of three organic modifiers (methanol, n-hexane and toluene), added at 5%/vol, at the same temperature and pressure conditions, were then considered. PAHs were characterized by GC–MS and the recover yield was estimated for 6 PAHs that were representative of those present in the sample, according to their molecular weight and to the number of condensed rings. The analytical conditions giving the best recovery efficiency were used on an unpolluted soil sample spiked with 11 PAHs of environmental importance at a concentration similar to that certified for the sediment sample. An increase in the yield of recovered PAHs, using methanol as co-solvent, was observed while higher temperatures caused a negative effect on the quantity of recovered pollutants. The recovery yield for PAHs from the spiked soil sample was measured and found to be grater than 90%. Better recoveries were obtained for those compounds with higher molecular weight.