Modeling the formation of chlorination by-products in river waters with different quality

Water chlorination results in formation of a variety of organic compounds, known as chlorination by-products (CBPs), mainly trihalomethanes (THMs) and haloacetic acids (HAAs). Factors affecting their concentrations have been found to be organic matter content of water, pH, temperature, chlorine dose, contact time and bromide concentration, but the mechanisms of their formation are still under investigation. Within this scope, chlorination experiments have been conducted with river waters from Lesvos island, Greece, with different water quality regarding bromide concentration and organic matter content. The factors studied were pH, time and chlorine dose. The determination of CBPs was carried out by gas chromatography techniques. Statistical analysis of the results was focused on the development of multiple regression models for predicting the concentrations of total trihalomethanes and total HAAs based on the use of pH, reaction time and chlorine dose. The developed models, although providing satisfactory estimations of the concentrations of the CBPs, showed lower correlation coefficients than the multiple regression models developed for THMs only during previous study. It seems that the different water quality characteristics of the two river waters in the present study is responsible for this phenomenon. The results indicate that under these conditions the formation of THMs and HAAs in water has a more stochastic character, which is difficult to be described by the conventional regression techniques.