A sensitive diffusion sampler for the determination of volatile organic compounds in ambient air

We developed a diffusive sampling device (DSD-voc) for volatile organic compounds (VOCs) which is suitable for collection of low level VOCs and analysis with thermal desorption. This sampling device is composed of two parts, an exposure part made of a porous polytetrafluoroethylene (PTFE) filter, and an analysis part made of stainless-steel tubing. The DSD-voc collects VOCs through the mechanism of molecular diffusion. Collection is controlled by moving the adsorbent from the exposure part to the analysis part by changing the posture of the DSD-voc. Adsorbates in the DSD-voc were analyzed by GC/MS with a thermal desorption cold trap injector (TCT). The TCT has the advantage of being able to accept the entire quantity of VOCs. We connected a condenser between the DSD-voc and the trap tube to prevent moisture from freezing in the trap tube when the sampler was packed with strong adsorbent. We also examined the desorption efficiency for VOCs from several types of adsorbents (CarboxenTM 1000, CarbosieveTM G, Carbosieve S III, CarbotrapTM B, and activated carbon) over a wide range of temperatures. Carboxen 1000 was suitable for the determination of VOCs with a low boiling point range, from CFC12 to hexane, while Carbotrap B was suitable for VOCs from hexane to 1,4-dichlorobenzene. The limits of detection with Carboxen 1000 and Carbotrap B were 0.036–0.046 and 0.0035–0.014 ppb, respectively, for a sampling duration of 24 h. Coefficients of variation for concentrations of major VOCs ranged from 3.8 to 14%. It is possible to estimate atmospheric VOCs at sub-parts per billion (sub-ppb), with high sensitivity, by using both adsorbents in combination.