Two-stage chemical fractionation method for the analysis of elements and non-volatile inorganic ions in PM10 samples: Application to ambient samples collected in Rome (Italy)

A two-stage micro-analytical scheme for the determination of metals and ions in atmospheric particulate matter collected on only one Teflon filter was developed. In the first stage the collected particles are chemically fractionated for their solubility in a pH-buffered extracting solution; in the second stage the residue is mineralised. The major non-volatile inorganic ions (Cl−, NO3−, SO42−, Na+, NH4+, Ca2+, Mg2+) are determined in the first fraction by ion-chromatography (IC), while metals and metalloids (Al, As, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, S, Sb, Se, Si, Ti, V, Zn) are determined in both the acetate extractable and the mineralised residual fractions by inductively coupled plasma optical emission spectroscopy (ICP-OES). The procedure was applied to ambient 24-h PM10 samples collected on Teflon filters during two field campaigns carried out at two sites in the area of Rome (Italy). The variations in the chemical composition of the collected particles during the two periods were interpreted in the light of the dilution properties of the lower atmosphere and of the back-trajectories of the air masses. The difference in the results between the two locations was interpreted in the light of their proximity to the emission sources. It was found that the acetate extractable and the mineralised residual fraction of some metals exhibit a different temporal pattern, suggesting the existence of different emission sources of the two fractions.