Effect of powder treatment on the crystallization behaviour and phase evolution of Al2O3–High ZrO2 nanocomposites

Al2O3–ZrO2 composites containing nominally equal volume fraction of Al2O3 and ZrO2 have been synthesized through combined gel-precipitation technique. Subsequently the gels were subjected to three different post gel processing treatments like ultrasonication, ultrasonication followed by water washing and ultrasonication followed by alcohol washing. It was observed that while in unwashed samples crystallization took place at low temperature, crystallization was delayed in the washed gels. The phase transition of ZrO2 in the calcined gels followed the sequence; amorphous fi cubic ZrO2 fi tetragonal ZrO2 fi monoclinic ZrO2. On the other hand, phase transition in alumina followed the sequence amorphous to c-Al2O3, the transition taking place at 650 C. No a-Al2O3 could be detected even after calcination at 950 C. However, all the sintered samples had a-Al2O3. In spite of high linear shrinkage (19–21%) during sintering, the sintered sample had density of only above 70% for all the four varieties of the powders. However, in spite of the low sintered density of the pellets, 31% tetragonal zirconia could be retained after sintering at 1400 C and it reduced to about 16% at 1600 C.