Spark plasma sintering of UHTC powders obtained by self-propagating high-temperature synthesis

Fully dense ZrB2–SiC and HfB2–SiC ultra-hightemperature ceramics (UHTCs) composites are fabricated by first synthesizing via self-propagating high-temperature synthesis (SHS) the composite powders from B4C, Si, and Zr or Hf reactants, and subsequently consolidating the product by spark plasma sintering (SPS) without the addition of any sintering aid. It was found that the SHS technique leads to the complete conversion of reactants to the desired products and the SPS allows for the full consolidation ([99.5% relative density) under the optimal operating conditions of 1800 C/ 20 min/20 MPa and 1800 C/30 min/20 MPa, for the cases of ZrB2–SiC and HfB2–SiC, respectively. Based on the results reported in this work, it can be stated that the combination of SHS and SPS methods represents a particularly rapid and convenient preparation route (lower sintering temperature and processing time) for UHTCs as compared to the techniques available in the literature for the fabrication of analogous products.