Combined advanced oxidation and biodegradation of industrial effluents from the production of stilbene-based fluorescent whitening agents

Three different industrial wastewaters from the production of stilbene-based fluorescent whitening agents were investigated with regard to the applicability of advanced oxidation processes combined with biodegradation. Oxidation processes included the application of ozone, hydrogen peroxide, UV-radiation and Fentonʹs reagent (Fe2+/H2O2). Characterization of the combined chemical–biological treatment was done by sum parameters and HPLC analysis. In addition, toxicity was determined using the luminescence inhibition test. Results showed that processes producing OH-radicals without the need of UV-irradiation proved to be suited for the oxidation of all three wastewaters. H2O2/UV processes were ineffective due to the high inner filter effect of the effluents. Comparing the combined oxidative-biological process with biological treatment, the applied pre-oxidation steps did not always lead to a significant improvement of the biological degradation. In one case, an inverted treatment starting with biodegradation followed by oxidation turned out to be the preferable procedure. After oxidation with ozone or ozone combined with UV-irradiation, an increase in toxicity was partly observed indicating the formation of toxic intermediate products. In some cases samples had to be diluted before the biodegradation step to achieve a better biodegradability.