Influence of thermal properties of zirconia shroud on analysis of PHEBUS FPT0 bundle degradation test with ICARE2 code

In the FPT0 test of the PHEBUS/FP program, it was observed that the fraction of liquefied UO2 reached 50%, which is much larger than the expected maximum value of 20%. Most of the post-test analyses with various computer codes underpredicted the bundle temperature during a late phase and could not reproduce such a large core degradation. In most of the previous analyses, the shroud thermal conductivity evaluated based on the Pearsʹ ZrO2 specific heat data and the thermal diffusivity measured by JAERI was used. However, recent thermal property data books adopt a lower specific heat than measured by Coughlin and Kingʹs at high temperature. The present analyses with ICARE2 showed that the FPT0 bundle behavior could be mostly reproduced by using the shroud thermal conductivity based on Coughlin and Kingʹs. If the present calculation is assumed to be correct enough, the shroud thermal conductivity at high temperature could be smaller than the current evaluation based on the Pearsʹ data. Since the shroud thermal conductivity has thus a strong effect on the bundle behavior, further measurement and evaluation of the thermal properties of the shroud are highly recommended.