Behavior of mechanical properties of nickel-alloyed reactor pressure vessel steel under neutron irradiation and post-irradiation annealing Original Research Article

The effect of neutron irradiation and post-irradiation thermal annealing on tensile and impact properties of Cr–Ni–Mo steel used for WWER-1000 reactor pressure vessel (RPV) manufacturing was studied. A gap in yield stress and ultimate tensile stress fluence dependence at the fluence range of 0–3×1023 neutrons m−2 was observed while ductile-to-brittle transition temperature (DBTT) was continuously increasing with damage dose. The post-irradiation annealing recovery of tensile properties was found to be higher than the one of impact properties. Over-recovery of tensile properties due to 460 and 490°C post-irradiation annealings were observed. The annealing effectiveness of WWER-440 and WWER-1000 grades was compared. Nickel was supposed to affect both the radiation sensitivity and the post-irradiation residual DBTT shift of WWER-1000 type steel.