Transient experiments on fast reactor core thermal-hydraulics and its numerical analysis: Inter-subassembly heat transfer and inter-wrapper flow under natural circulation conditions Original Research Article

Sodium experiments were conducted on core thermal-hydraulics simulating a scram transient of a large scale fast breeder reactor using the test facility PLANDTL-DHX with seven fuel subassemblies. The influence of inter-subassembly heat transfer on temperature distribution in the subassembly was revealed via measurements. The flow in the gap between neighboring subassemblies called inter-wrapper flow (IWF) was also studied in relation to its capability of cooling the subassemblies. A computational model is presented for predicting the transient without IWF. The multi-dimensional numerical analysis model employs an empirical correlation to simulate mixing effects between adjacent subchannels. It was shown that the present computational method could evaluate the transient behavior of thermal-hydraulics in the subassemblies accurately from forced to natural circulation accompanied by inter-subassembly heat transfer and flow redistribution in the subassembly. The cooling effects of IWF on the fuel subassemblies were found in spite of natural circulation flow reduction in the primary loop attributable to temperature decreases in the upper non-heated section in the core. The inter-wrapper flow can effectively cool the core under extreme conditions of low flow rates through the core.