The design and evaluation of a passively cooled containment for a high-rating pressurized water reactor Original Research Article

An integrated pressurized water reactor (PWR) containment was conceptualized that allows heat to be rejected passively to the environment. The proposed containment is based on the demonstrated Ebasco Waterford 3 design. The secondary concrete shell was equipped with inlet and outlet vents that create an air-convection annulus. These vents also permit the submersion of the lower part of the primary containment into an external water pool. An internal water pool located at the bottom of the lower containment was added to increase in-containment heat storage. The performance of the proposed passively cooled containment was evaluated using a subdivided volume code, gothic version 3.4e; the relative novelty of subdivided volume analyses for containment performance evaluation requires experimental verification of principal code predictions. Two experiments were carried out; one to test the performance of the external moat, and one to verify the code’s ability to predict thermal-stratification inside the containment. To improve the subdivided-volume simulation of convection-related parameters, a modeling technique (boundary layer flow approximation) was devised. Finally, the behavior of the proposed containment was evaluated for the worst-case large break loss of coolant accident and the worst-case main steam line break accident. Peak pressures remained below 0.45 MPa during both transients; internal wall pressure differences, equipment qualification temperatures, pressure restoration time also remained below design limits. The mitigation capability of hydrogen recombiners was also evaluated.