About the significance of PD measurements in liquids

This paper presents investigations concerning the variations and significance of PD measurements in mineral oil, when detectors with different frequency response are used. Typical durations of discharge phenomena in liquids are much longer than in other media, and the measurement technique must be adapted accordingly. However, depending on the application concerned, this is not always possible. In this study, experiments and calculations are carried out to determine typical errors produced when classical RLC measurement impedances with various frequency responses are used to measure PDʹs in liquids. Experiments are done with corona and creeping discharges in mineral oil, and compared with corona and spark discharges in air. These examples allow us to conclude that when a calibrated high frequency PD measurement system is used, the ratio of measured to actual charge is much lower for discharges in liquids than in gases. If measurements are carried out on a practical device that may include various types of PD sources, the high frequency measurement system will strongly underestimate discharges in liquids compared to other discharge types. This discrepancy versus discharge type increases when the frequency response of the measurement system is increased.