Planar Josephson junctions fabricated with magnesium diboride films

Josephson junctions were fabricated in three planar configurations using a focused ion beam (FIB) to cut (greater than or equal to)70 nm gaps in MgB/sub 2/ bridges. In two of the approaches - narrowed microbridges where a 0.1 (mu)m bridge was left in place after the FIB cut or thinned microbridges where a 20-40 nm-thick film layer remained uncut - we reproduced junction results obtained by other researchers but with I/sub c/(T)>0 at substantially higher temperatures, >32 K. Measurements were made of critical current modulation in an applied magnetic field and I-V curves were measured with the chips exposed to 1-10 GHz radiation. In the third configuration, S-N-S structures were made by filling the gap made by the FIB with a noble metal. This configuration is preferred to S-Sʹ-S since the normal-conductor coherence length of 40-100 nm for a clean metal roughly matches the width of the FIB cut. Junction R/sub n/ measurements showed that ex-situ Au deposited after a low-energy argon ion cleaning was not as effective as in-situ Pt deposition for obtaining low-resistance S-N interfaces.