Abstract :
Processing of wood by conventional mechanical tools like saws or planes leaves behind a layer of squeezed wood only
slightly adhering to the solid wood surface. Laser ablation of this layer could improve the durability of coatings and glued
joints. For technical applications, thorough knowledge about the laser ablation process is necessary. Results of ablation
experiments by excimer lasers, Nd:YAG lasers, and TEA-CO2 lasers on surfaces of different wood types and cut
orientations are shown. The process of ablation was observed by a high-speed camera system and optical spectroscopy. The
influence of the experimental parameters are demonstrated by SEM images and measurement of the ablation rate depending
on energy density. Thermal effects like melting and also carbonizing of cellulose were found for IR- and also UV-laser
wavelengths. Damage of the wood surface after laser ablation was weaker for excimer lasers and CO2-TEA lasers. This can
be explained by the high absorption of wood in the ultraviolet and middle infrared spectral range. As an additional result,
this technique provides an easy way for preparing wood surfaces with excellently conserved cellular structure. q1998
Elsevier Science B.V.
