پديدآورندگان :
قاسم زاده حسن Ghasemzadeh@kntu.ac.ir دانشگاه صنعتي خواجه نصيرالدين توسي; , خياطيان حسين hossein.khayatian@yahoo.com دانشگاه صنعتي خواجه نصيرالدين توسي; , افراسيابيان آرمين hossein.khayatian@yahoo.com دانشگاه آزاد اسلامي همدان;
كليدواژه :
كائولينيت , گازوئيل , تثبيت خاك با سيمان , مقاومت فشاري محصور نشده , pH
چكيده فارسي :
به دليل كاهش شديد مقاومت و قابليت تورم خاك رس، در حضور آب، اين خاك يكي از خاك¬هاي مسئله¬دار در مهندسي عمران مي¬باشد. با اين حال در بسياري از مناطق ممكن است بخش عمده خاك محل، همين خاك رس باشد. بنابراين شناخت ويژگي¬هاي اين خاك در شرايط مختلف، كمك بسزايي در پيشبرد اهداف عمراني خواهد كرد. يكي از راهكارهايي كه باعث مي¬شود مشكلات ناشي از خاك رس كاهش يابد، تثبيت اين خاك با مواد افزودني مي¬باشد. از ديگر عواملي كه مي¬تواند بر روي ويژگي¬هاي خاك رس تأثير بگذارد، افزودن آلاينده¬هاي هيدروكربني به خاك مي¬باشد. در اين مقاله ما ابتدا خاك رس كائولينيت را با مقادير 5، 10 و 20 درصد سيمان تثبيت مي¬كنيم. سپس با انتخاب خاك تثبيت شده با 10 درصد سيمان، مقادير 5/2، 5، 10 و 20 درصد گازوئيل را به اين خاك اضافه مي¬كنيم و مشاهده مي¬كنيم كه بعد از دوره عمل¬آوري 28 روزه، افزودن سيمان باعث افزايش مقاومت فشاري محصور نشده و افزايش pH نمونه، نسبت به نمونه رس نرم تثبيت نشده مي¬شود. نكته قابل توجه در مورد افزودن گازوئيل اتفاق مي¬افتد، به نحوي كه با افزودن درصد پاييني از اين آلاينده به نمونه تثبيت شده با 10 درصد سيمان، كه در اين تحقيق 5/2 درصد مي¬باشد، ما افزايش مقاومت فشاري محصور نشده را نسبت به نمونه تثبيت شده با همين درصد سيمان ولي بدون آلاينده، خواهيم داشت. با افزايش درصد آلاينده به مقادير 5، 10 و 20 درصد، ما شاهد كاهش مقاومت فشاري محصور نشده، نسبت به نمونه تثبيت شده بدون آلاينده خواهيم بود. همچنين در مورد تغييرات pH، در خاكي كه با 10 درصد سيمان تثبيت شده، مي¬بينيم كه كمترين pH در نمونه با آلاينده 5 درصد اتفاق مي¬افتد و مقدار آن 44/11 مي¬باشد. اما در نمونه¬ بدون سيمان، مشاهده مي¬شود كه با افزايش درصد آلاينده pH نمونه كاهش مي¬يابد و كمترين مقدار آن 81/8 مي¬باشد كه در نمونه با 20 درصد گازوئيل اتفاق مي¬افتد.
چكيده لاتين :
Due to the sharp decrease in the resistance and the ability of clay to swell, in the presence of water, this soil is one of the most problematic soils in civil engineering. However, in most areas, the bulk of the soil may be the same clay. Therefore, recognizing the characteristics of this soil in different conditions will be of great help in advancing developmental goals. One of the solutions that reduce clay problems is to stabilization the soil with additives. Another factor that can affect the properties of clay is the addition of hydrocarbon contaminants to the soil. In this paper, we first stabilize kaolinite with amounts of 5, 10 and 20% of cement. Then, by choosing the soil stabilized with 10% of the cement, add 2.5, 5, 10 and 20% of the gasoline to the soil, and after 28 days of curing, adding cement increased The compressive strength is not enclosed and the pH of the sample is increased relative to the non-stabilized soft clay sample. A remarkable point is about the addition of diesel oil, so that by adding a lower percentage of this contaminant to a sample stabilized with 10% cement, which is 2.5% in this study, we increase the unconfined compressive strength We will have a stabilized sample with the same percentage of cement but no contaminants. By increasing the amount of pollutants to 5, 10 and 20 percent, we will see a decrease in unconfined compressive strength compared to a non-polluting stabilized sample. Also, in the case of pH changes, in soil with 10% cement stabilization, the lowest pH in the specimen occurs with a contaminant of 5% and is 11.44%. However, in non-cement samples, it can be seen that the pH of the sample decreases with increasing percentage of pollutants and the lowest value is 8.81, which occurs in the sample with 20% gas oil.