پديدآورندگان :
Memerifard Seyed Aref Sa.memarifard@merc.ac.ir Master student of Material science and engineering , Ceramic Department, Materials and Energy Research Center, Karaj, Iran , Rahimipour Mohammadreza M-rahimi@merc.ac.ir 2Department of Material science-Ceramic Engineering, Materials and Energy Research Center, Karaj, Iran , Mobashrpour Iman , i_mobasherpour@merc.ac.ir 3Department of Material science-Ceramic Engineering, Materials and Energy Research Center, Karaj, Iran
كليدواژه :
Hard anodizing , DC mode , Organic additive , voltage rate , oxide layer
چكيده فارسي :
Hard anodizing is a term that relates to the anodic coatings with high hardness and abrasion resistance. As has been pointed out in an article by researchers, these coatings are usually more thicker than typical anodizing coating causes and in special circumstances to arise. The concentration of the oxide film layer in this process and therefore increases further. We also in the process electrolyte temperature is always kept low to reduce the rate of dissolution of the oxide film. In this project DC mode of Anodization used to study of voltage changes in different electrolyte consist of five types of organic additive
