شماره ركورد كنفرانس :
4282
عنوان مقاله :
بررسي عوامل موثر بر تخريب لاستيكي استاتور جهت افزايش عمر موتورهاي PDM
عنوان به زبان ديگر :
Study of effective factors on destruction the rubber stator PDM motors and increased its life
پديدآورندگان :
عباسي چليچه بابك دانشگاه آزاد اسلامي واحد شهر مجلسي , حجتي نجف آبادي اكبر دانشگاه آزاد اسلامي واحد شهر مجلسي
تعداد صفحه :
16
كليدواژه :
موتور درون چاهي جابجايي مثبت آسترلاستيكي استاتور تنش هاي حرارتي پسماند
سال انتشار :
1395
عنوان كنفرانس :
نهمين همايش ملي مهندسي مكانيك
زبان مدرك :
فارسي
چكيده فارسي :
حفاري جهت دار جز لاينفك حفاري جهت توسعه ميادين نفتي است. در اين نوع حفاري از موتورهاي درون چاهي مثبت براي بالا بردن سرعت حفاري عمودي استفاده مي شود. اين موتورها از سيال تحت فشار بين روتور و استاتور لاستيكي براي دوران استفاده مي كنند. اصلي ترين عامل از كار افتادن اين موتورها شكست الاستومر لاستيكي استاتور آنها در اثر عبور گل حفاري تحت فشار است. دراين مقاله عوامل تاثير گذار بر عمر و شكست الاستومر لاستيكي بررسي و پيشنهادي براي جايگزيني آن مطرح مي گردد. به اين منظور شبيه سازي كامل روتور و استاتور به صورت سه بعدي تحت تاثير بارهاي ديناميكي، فشار، حرارت و نوع و با در نظر گرفتن نوع گل حفاري انجام گرديد. نتايج شبيه سازي با FSI الاستومر به روش نمونه مدل تجربي در اثر تنش هاي حرارتي انطباق پيدا نمود. نتايج نشان داد تغيير نوع لاستيك الاستومر مي تواند بارهاي تنشي و حرارتي بيشتري را تحمل نمايد و عمر بالاتري نسبت به خوردگي داشته باشد.
چكيده لاتين :
The use of directional drilling is now considered an integral part of conventional drilling methods to develop oil fields. In this type of downhole drilling motors positive is used to speed up drilling. The engines of fluid pressure between the rotor and stator during use rubber. These motors use pressurized fluid between the rotor and stator rubber for a rotate. The main cause of the breakdown of the motor stator elastomer failure caused by the passage of drilling mud under pressure. This article is considered factors affecting the life and the failure of elastomer reviews and suggestions to replace it. In order to simulate a rotor and stator in three dimensions under the influence of dynamic loads, pressure, temperature and type of elastomer FSI approach and taking into account the type of drilling mud was carried out. The simulation results with the experimental model was adapted as a result of thermal stresses.The results showed that the type of elastomer tires can handle more stress and thermal loads and corrosion is higher than life.
كشور :
ايران
لينک به اين مدرک :
بازگشت