شماره ركورد كنفرانس :
4326
عنوان مقاله :
بررسي راندمان حذف روغن و چربي در صنايع
عنوان به زبان ديگر :
Evaluation of oil and grease removal efficiency in industries
پديدآورندگان :
شريفي پور سارا ssharifipour70@yahoo.com دانشگاه آزاد اسلامي واحد اهواز; , جليل زاده رضا jalilzadehreza@yahoo.com دانشگاه آزاد اسلامي واحد اهواز; , سبزعليپور سيما Shadi582@yahoo.com دانشگاه آزاد اسلامي واحد اهواز;
كليدواژه :
آريوكروم بلك تي , هيدروژل , سينتيك , غلظت , سنتز , جذب سطحي
عنوان كنفرانس :
پنجمين كنفرانس بين المللي نوآوري هاي اخير در شيمي و مهندسي شيمي
چكيده فارسي :
روغن و چربي با تشكيل لايه¬اي بر روي سطح آب، باعث بروز مناظر زشت و ناپسند، مشكلاتي در فرآيند تصفيه و ايجاد بو مي¬گردد. هدف از اين تحقيق، مطالعه كاهش آلودگي روغن وگريس موجود در پساب صنايع با استفاده از سيستم شناورسازي با هواي محلول بود. درفاز اول اين تحقيق از پساب خام صنعت براي سنجش دوز بهينه ماده منعقد كننده و ميزان روغن وچربي، مواد جامد معلق، اكسيژن مورد نياز شيميايي، اكسيژن مورد نياز بيولوژيكي، مواد جامد محلول، كدورت، pH نمونه¬برداري شد. فاز دوم مطالعه با استفاده از فرآيند شناورسازي با هواي محلول با استفاده از يك پايلوت شناورسازي با هواي محلول و نمونه¬برداري و تعيين مجدد مقادير پارامترهاي ذكرشده براي تعيين راندمان حذف روغن و چربي در دو فشار مختلف و سه زمان ماند مختلف بهينه بود. زمان ماند انتخابي 30، 60 و 90 دقيقه و فشارهاي انتخابي 3 و 4 پاسكال بود. در اين آزمايش مشخص گرديد كه، روش شناورسازي با هواي محلول مي¬تواند روغن و چربي را با كارايي حدود بيش از 99% حذف و به مقداري چون 0.1 ميلي¬گرم درليتر برساند.
چكيده لاتين :
Oil and greasy forms layers on the surface of the water, causing ugly landscapes, problems in the process of filtration and creating odor. The purpose of this study was to study the reduction of oil and grease contamination in industrial wastewater using a flotation system with soluble air. In the first phase of this research, the raw material was collected from the industrial wastewater for measuring the optimum dose of coagulant and the amount of oil and fat, suspended solids, oxygen required for the chemical, oxygen required for the biological, soluble solids, turbidity and pH. The second phase of the study was performed using a soluble air floatation process using a soluble air flotation pilot and re-determination of the parameters mentioned for determining the oil and fat removal efficiency at two different pressures and three different optimal time-outs. The selected selective time was 30, 60 and 90 minutes, and the selective pressures were 3 and 4 pc. In this experiment, it was found that the flotation method with soluble air can remove oil and fat with an efficiency of more than 99% and reach a value of 0.1 milligrams per liter.