شماره ركورد كنفرانس :
3299
عنوان مقاله :
شبيه سازي فرآيند جذب بيولوژيكي سرب از محلول آبي توسط لجن فعال در ستون پيوسته با استفاده از نرم افزار كامسول
پديدآورندگان :
اسفنديان حسين دانشگاه سمنان - دانشكده مهندسي شيمي , كلانتري بنگر محمد دانشگاه علوم و فنون مازندران، بابل , غفوري طالقاني حميدرضا دانشگاه مازندران بابلسر - دانشكده فني و مهندسي - گروه مهندسي شيمي
كليدواژه :
شبيه سازي , نرم افزار كامسول , ستون پيوسته , سرب , لجن فعال
عنوان كنفرانس :
اولين كنفرانس بين المللي فناوري هاي نوين در علوم
چكيده فارسي :
ورود فلزات سنگين به منابع تامين آب شرب، اثرات زيان بار بر سلامتي انسان و محيي زيسي مخصوصيا در آب
هاي سطحي شمال كشور دارد. در اين تحقيق شبيهسازي ديناميك فرآيند جذب سرب با استفاده از لجن فعيال در سيتون
پيوسته توس نرم افزار كامسول انجام گرف . نتايج نشان داد كه نتايج شبيه سازي كاملا بر نتايج تجربي منطبق مي باشيد.
با افزايش ارتفاع ستون، شيب منحني هاي شكس كاهش يافته و ناحيه انتقال جرم گسترده تير شيده اسي . از ايين رو بيا
افزايش مقدار ارتفاع بستر، جذب سرب به ازاي واحد جرم جاذب در ستون افزايش يافته اس . از طرفي افزايش نرخ جرييان
افزايش سرع را به دنبال دارد كه اين باعث كاهش مقاوم فيلمي ميشود و در نهاي افزايش نرخ انتقال جرم را به همراه
دارد. همچنين با افزايش غلظ ورودي، ميزان بارگذاري آلاينده با بستر افزايش يافته و نيروي رانش به منظور انتقال جيرم
بيشتر مي شود و ضمن كوتاه تر شدن طول ناحيه انتقال جرم، شكس بستر در زمان كوتاه تري اتفاق مي افتد.
چكيده لاتين :
The entry of heavy metals into drinking water sources has harmful effects on human health and the environment, especially in the northern waters of the country. In this research, dynamic simulation of the lead absorption process using active sludge in the continuous column was performed using Comsol software. The results showed that the simulation results are completely consistent with experimental results. With increasing column height, the slope of the breakthrough curves has decreased and the mass transfer region has become wider. Therefore, by increasing the height of the bed, the absorption of lead per unit mass of adsorbent in the column has increased. On the other hand, the increase in the rate of flow increases the speed, which reduces the film's resistance and ultimately increases the mass transfer rate. Also, by increasing the inlet concentration, the loading rate of the pollutant increases with the bed and the thrust force increases in order to transfer the mass, and along with shorter the length of the mass transfer region, the failure of the bed occurs in shorter time.