شماره ركورد كنفرانس :
3289
عنوان مقاله :
توليد كاربيد تيتانيم و نانو كامپوزيت TiC-SiO2 با استفاده از روتيل به روش سنتز احتراقي
عنوان به زبان ديگر :
Production of titanium carbide and TiC-SiO2 nanocomposite using rutile via SHS method
پديدآورندگان :
حاج عليلو عبداله دانشگاه آزاد اسلامي واحد خامنه , سعيدي علي دانشگاه صنعتي اصفهان - دانشكده مهندسي مواد , عباسي مهرداد دانشگاه آزاد اسلامي واحد كرج - دانشكده مهندسي مواد
كليدواژه :
كاربيد تيتانيم , نانو كامپوزيت TiC-SiO2 , سنتز احتراقي , سراميك , آلياژ سازي مكانيكي
سال انتشار :
آبان 1389
عنوان كنفرانس :
چهارمين همايش مشترك انجمن مهندسين متالورژي و جامعه علمي ريخته گري ايران
چكيده فارسي :
در اين تحقيق ، امكان تهيه نانو كامپوزيت TiC-SiO2 به عنوان يك سراميك مفيد از روتيل ، گرافيت و پودر سيليسيم با استفاده از فعال سازي مكانيكي بررسي گرديد. روتيل همراه با گرافيت و سيليسيم در يك آسياي پر انرژي قرار داده شد و در زمانهاي مختلف از آن نمونه برداري شد. نتايج نشان داد كه پس از 60 ساعت آسيا كاري اثري از فاز كاربيد تيتانيم مشاهده نشد و فقط از شدت پيك هاي سيليسم كاسته شده و به پهناي آنها افزوده شده است. پودرهاي اكتيو شده در يك كوره لوله اي داراي اتمسفر كنترل شده در دماهاي مختلف سنتز شد. نتايج XRD نشان داد دماي سنتز با افزايش زمان آسيا كاري به مقدار قابل توجهي كاهش يافته و به دمايي بين 1200°C و 900°C رسيده است. همچنين از روي پهناي پيك هاي الگوي پراش اشعه ايكس ، ديده شد كه اندازه كريستال هاي TiC توليد شده در حد نانو مي باشد.
چكيده لاتين :
In this reasech, the possibility of providing of TiC-SiO2 namocomposite as a useful ceramic, from rutile, graphite and Si powder using mechanically activated sintering was studied. Effect of the milling time and synhtesis temperture was examined. The samples were prepared by mixing the raw materials in a planetary ball mill at different times and then the products were analyzed using XRD. The results showed that after 10hr milling, rutile reduced to intermediate oxides and also, Si peaks was observed on XRD pattern. With increasing milling time from10hr up 60hr, the no effect of titanium carbide was observed and only the peaks width of XRD patterns of Si was increased while their intensity decrease. The activated powders were synthesized at different temperatures in tube furnace under the argon atmosphere. The XRD results showed that with increasing milling time the synthesizing temperature remarkably was decreased. In 60hr milled samples, titanium carbide and SiO2 phases were produced at about 9000C. an‎d also, it was observed from the width of XRD patterns peaks that the sizes of produced SiO2 and TiC grain are in the nano scale.
كشور :
ايران
تعداد صفحه 2 :
10
از صفحه :
1
تا صفحه :
10
لينک به اين مدرک :
بازگشت