شماره ركورد كنفرانس :
5265
عنوان مقاله :
تأثير تخلخل لايه مياني بر خواص راحتي پوشاك ورزشي چندلايه
عنوان به زبان ديگر :
The influence of porosity of the middle layer on the comfort properties of multi-layer sportswear
پديدآورندگان :
رمضانپور محدثه دانشگاه گيلان , قره آقاجي علي اكبر aghaji@aut.ac.ir دانشگاه صنعتي اميركبير , موسي زادگان فاطمه دانشگاه صنعتي اميركبير , سلطاني پرهام دانشگاه صنعتي اصفهان
كليدواژه :
تخلخل , پوشاك ورزشي چندلايه , راحتي پوشاك , لايه مياني
عنوان كنفرانس :
سيزدهمين كنفرانس ملي مهندسي نساجي ايران
چكيده فارسي :
در اين مطالعه به بررسي تأثير تخلخل لايه مياني بر خواص راحتي پوشاك ورزشي چندلايه ميپردازيم. به اين منظور، از پارچه بادگير براي لايه خارجي و از پارچه حلقويپودي يكروسيلندر براي لايه داخلي استفاده شده است. همچنين از منسوجات بيبافت با تراكم سوزنزني متفاوت به عنوان لايه مياني استفاده شده است. خواص راحتي لايه ها شامل قابليت عبوردهي هوا، قابليت عبوردهي بخار آب و مقاومت گرمايي در نمونههاي تكلايه و سهلايه قبل از فرآيند دوخت و پس از آن اندازهگيري شده است. نتايج به دست آمده از اين مطالعه بيانگر آن است كه در نمونه هاي سهلايه، قابليت عبوردهي هوا تحت تأثير لايۀ با كمترين قابليت عبوردهي هوا كاهش يافته است. اما مقاومت گرمايي نمونه هاي سهلايه به دليل تركيب لايه ها و همچنين تشكيل لايه هاي هواي ساكن در بين لايهها، به طور قابلتوجهي افزايش يافته است. به دليل قابليت تنفسپذيري مناسب لايه هاي خارجي و داخلي، قابليت عبوردهي بخار آب در نمونه هاي سهلايه تحتتأثير لايه مياني بوده است
چكيده لاتين :
In this study, the influence of middle layer porosity on the comfort properties of multi-layer sportswear is considered. To this end, wind stopper fabric and single jersey weft knitted fabric were used as outer layer and inner layer, respecticely. Moreover, nonwoven layer with various needle punching density was applied as middle layer. The comfort properties of layers including air permeability, water vapor permeability and thermal resistance of single layer and three-layer samples before and after sewing were measured. Obtained outcomes reveal that the air permeability of three-layer samples is influenced by the constituent layer with the least air permeability. However, the thermal insulation of three-layer samples due to the assembly of layers and also formation of entrapped air layer between adjacent layers is increased considerably. Since outer layer and inner layer have proper breathability, the water vapor permeability of three-layer samples has been influenced by the middle layer