Author/Authors
ZEYVELĠ, Metin Karabük Üniversitesi - Teknik Eğitim Fakültesi - Makine Eğitimi Bölümü, Turkey , KARAMUSAOĞLU, Halil Ahmet Karabük Üniversitesi - Fen Bilimleri Enstitüsü - Makine Eğitimi Anabilim Dalı, Turkey
Title Of Article
EFFECT OF WIPER CUTTING TOOL GEOMETRY ON MACHINING OF DUCTILE CAST IRON
شماره ركورد
41511
Abstract
In this study the effect of wiper cutting tool geometry and cutting tool nose radius was investigated on machining of ductile cast iron (DCI). In this purpose, turning test were carried out at three cutting speeds (200, 275 and 350 m/min), three feed rates (0.05, 0.15 and 0.15 mm/rev) and at a constant depth of cut (1 mm). In turning test were carried out dry cutting and coated cemented carbide was used as cutting tool. The results show minimum surface roughness were obtained 1.2 mm cutting tool nose radius. The best surface roughness was obtained in experiments at the big tool nose radius, high cutting speed and lower feed rate. According to the results the increasing cutting tool nose radius has a positive effect on the surface roughness.
From Page
358
NaturalLanguageKeyword
Ductile cast iron , wiper cutting tool , surface roughness , machining
JournalTitle
Sigma Journal Of Engineering and Natural Sciences
To Page
366
JournalTitle
Sigma Journal Of Engineering and Natural Sciences
Link To Document