Abstract :
A Protocol for Adaptive Transmission in Direct-Sequence Spread-Spectrum Packet Radio Networks Wireless communication channels may change greatly from one transmission to the next, due to variations in propagation loss and interference. The use of fixed transmission parameters for such channels results in wasted energy when channel conditions are good. Adaptation of the power, code rate, and symbol rate reduces energy consumption and interference caused to other systems. Such adaptation requires information about the characteristics of the channel, which is more difficult to obtain in a packet radio network or other mobile ad hoc network than in a typical cellular communication system. We develop methods for providing partial information about the channel state from three statistics that are derived by different subsystems in the receiving terminals of a direct-sequence spread-spectrum packet ratio network. We present and evaluate a protocol that uses this information to adapt the transmission parameters in response to changes in interference and propagation conditions in the network. The performance of the new adaptive-transmission protocol is compared with a system with fixed transmission parameters and with an adaptive protocol that is furnished with perfect knowledge of the channel state at the completion of each transmission.
