A framework for the laboratory testing of Eulerian current measuring devices

THE DEVELOPMENT of testing techniques and procedures required to understand the performance of devices used to measure water currents has proven to be one of the most difficult and challenging tasks that the oceanographic community faces. It has long been recognized that some type of controllable relative water motion was a necessary element in the process of determining the accuracy of a current meter. A widely accepted solution is the towing tank where a current meter fastened to a moving carriage is moved through "still" water. A simple measurement of carriage speed over the ground compared to the current meter\´s flow measurement gives an indication of the accuracy of the device. Although this approach satisfied many, a sense that this technique was not sufficient spawned a few short-lived attempts at simulating time-varying flow conditions and developing deterministic models (transfer functions) for the response of inertial transducers. In addition, mathematical modeling of the motion of buoy moorings was attempted by a variety of investigators. In the late 1960\´s and early 1970\´s, the response of a current meter to the complex time-varying ocean environment became a major issue within the oceanographic community. It was clear that this information could not be obtained by simple steady-flow tow tank testing and that either dynamic controllable techniques must be developed or our ability to characterize the measurement environment must be improved.