DocumentCode
1052385
Title
Design and test of a 5 T superconducting wiggler
Author
Jacquemin, J.P. ; Perot, J.
Author_Institution
CENS, DPHPe/STIPE, Gif-sur-Yvette, France
Volume
24
Issue
2
fYear
1988
fDate
3/1/1988 12:00:00 AM
Firstpage
1226
Lastpage
1229
Abstract
A description is given of a superconducting wiggler built and tested at Saclay for the Laboratoire pour l´Utilisation du Rayonnement Electromagnetique (LURE) at Orsay, France. The wiggler is being used as light source on the 1.72-GeV positron beam of the DCI storage ring at Orsay to increase the photon flux at short X-ray wavelengths. The magnet has five half-periods of field with a central amplitude of nearly 5 T, two middles with -3.6 T, and two ends with 2 T. The period length is 260 mm, the magnet gap is 67 mm, and the room-temperature beam chamber gap is 30 mm. The field is produced by ten superconducting coils embedded in a soft iron yoke which contains the magnetic forces. A correction current is applied to the end coils to ensure a zero integral field in the whole range of field. The results of three magnet training tests are briefly discussed.
Keywords
X-ray production; superconducting magnets; synchrotron radiation; 1.72 GeV; 1.72-GeV positron beam; 260 mm; 30 mm; 5 T superconducting wiggler; 67 mm; DCI storage ring; LURE; Orsay; Saclay; correction current; light source; magnet gap; magnet training tests; period length; photon flux; room-temperature beam chamber gap; short X-ray wavelengths; superconducting coils; zero integral field; Iron; Light sources; Magnetic flux; Magnetic forces; Positrons; Storage rings; Superconducting coils; Superconducting magnets; Testing; Undulators;
fLanguage
English
Journal_Title
Magnetics, IEEE Transactions on
Publisher
ieee
ISSN
0018-9464
Type
jour
DOI
10.1109/20.11456
Filename
11456
Link To Document