Nano/Micro Dielectric Surface Flashover in Partial Vacuum

In this paper, we present experimental results of surface flashover characteristics of epoxy resin and epoxy resin cast with powdered Al₂O₃ (nano/micro-composite dielectric) samples in partial pressure of nitrogen. The flashover studies are conducted separately using DC and 20 kHz AC signals. The voltage, current, and light emission waveforms are obtained. The optical data is collected by a video camera and a photomultiplier tube (PMT). The nano/micro composite dielectric samples used in the experiments are produced in-house by mixing 1:10 weight ratio of AI₂O₃ powder with epoxy resin of known properties. Throughout this study, copper electrodes are used and are placed over the dielectric samples to initiate surface flashover events. The results of surface flashover voltages as a function of pressure are presented. Additionally, optical emission characteristics along with the voltage and current waveform data are also presented.