Electron-beam fabrication of GaAs low-noise MESFET´s using a new trilayer resist technique

A LO/HI/LO resist system has been developed to produce sub-half-micrometer T-shaped cross section metal lines using e-beam lithography. The system provides T-shaped resist cavities with undercut profiles. T-shaped metal lines as narrow as 0.15 µm have been produced. GaAs MESFET´s with 0.25-µm T-shaped Ti/Pt/Au gates have also been fabricated on MBE wafers using this resist technique. Measured end-to, end 0.25-µm gate resistance was 80 ω/mm, dc transconductance gmas high as 300 mS/mm was observed. At 18 GHz, a noise figure as low as 1.4 dB with an associated gain of 7.9 dB has also been measured. This is the lowest noise figure ever reported for conventional GaAs MESFET´s at this frequency. These superior results are mainly attributed to the high-quality MBE material and the advanced T-gate fabrication technique employing e-beam lithography.