Soft-Switching Zeta–Flyback Converter With a Buck–Boost Type of Active Clamp

This paper presents the system analysis, design consideration, and implementation of a soft-switching zeta-flyback converter to achieve zero-voltage switching (ZVS). In the proposed converter, the zeta and flyback topologies are adopted in the output side to achieve the following features: to share the power components in the transformer primary side, to achieve the partial magnetizing flux reset, and to share the output power. The buck-boost type of active clamp is connected in parallel with the primary side of the isolation transformer to recycle the energy stored in the leakage inductor of isolated transformer and to limit the peak voltage stress of switching devices due to the transformer leakage inductor when the main switch is turned off. The active clamp circuit can make the switching devices to turn on at ZVS. Experimental results taken from a laboratory prototype rated at 240 W, input voltage of 150 V, output voltage of 12 V, and switching frequency of 150 kHz are presented to demonstrate the converter performance. Based on the experimental results, the circuit efficiency is about 90.5% at rated output power, and the output voltage variation is about 1%.