Optical fiber tapers--A novel approach to self-aligned beam expansion and single-mode hardware

We investigate the performance characteristics of single-mode optical fiber tapers. These devices have a standard single-mode fiber geometry at one end and gradually increase in cross section so that the size of the core at the other end is comparable or greater to that of a multimode fiber. These tapers effectively expand the single-mode spot size and are envisioned as basic building blocks in a multitude of optical components. Analytical and experimental studies, at m, show that the dominant mode is preserved while traveling through the taper, from either direction. The excess coupling loss between two tapers is less than 0.1 dB. The sensitivity of the excess loss to lateral and axial displacements for two coupled tapered sections is greatly reduced compared to that between two single-mode fibers. The sensitivity to angular displacement is increased but is within practical limits. For example, for an excess loss of 0.5 dB, the maximum allowed lateral displacement is 3.1 μm for taper coupling, while only 0.73 μm is allowed in the case of fiber coupling. An axial displacement of 291 μm for taper coupling produces 0.5 dB loss while a displacement of only 16.5 μm produces a 0.5 dB loss for fiber coupling. For the same loss, angular displacements of 0.42° for the tapers and 1.77° for the fiber are allowed.