Wide tuning-range planar filters using lumped-distributed coupled resonators

This paper describes a discretely tunable filter topology based on lumped-distributed coupled transmission lines, particularly suitable for microelectromechanical systems switching devices. This topology is capable of simultaneous wide-band center frequency and bandwidth tuning, limited only by the electrical size of the transmission lines and the placement density of the switching devices. Low fractional bandwidths can be achieved without the need for large coupled-line spacings due to the antiphase relationship of the lumped capacitive and distributed electromagnetic coupling coefficients. The positions of the additional poles of attenuation due to the lumped capacitive coupling can be selected either above or below band leading to the choice of a narrow bandwidth design having good high-side performance or a design with compromised upper stopband performance, but with no bandwidth tuning limitations. The interaction between a pair of lumped-distributed coupled transmission lines is analyzed and the resulting model is used to develop a filter synthesis procedure. The synthesis procedure and filter performance are validated through theoretical and experimental comparisons using a filter with low-side attenuation poles