MRAM Device Incorporating Single-Layer Switching via Rashba-Induced Spin Torque

We designed and modeled a nonvolatile memory device that utilizes the Rashba spin-orbit coupling (SOC) to write data onto a free ferromagnetic (FM) layer and uses the tunneling magnetoresistive (TMR) effect for data read-back. The magnetic RAM (MRAM) device consists of a free (switchable) FM multilayer stack, in which a large internal electric field is induced at the interfaces between the oxide and the FM layer. In the FM layer, data writing by magnetization switching occurs via the Rashba-induced spin torque, while the data reading process in the system could be fulfilled via the current-perpendicular-to-plane TMR response. A general equation of motion for the local moments has been obtained by formally deriving the SU(2) spin-orbit gauge field arising due to SOC and the critical current density is estimated to be 1.2 ×10⁸ A/cm². Micromagnetic simulations were performed to demonstrate the Rashba-induced switching mechanism. By choosing or fabricating alloys with a lower magnetocrystalline anisotropy and enhancing the Rashba coupling strength via surface or interfacial engineering, the critical current may be further reduced to well below 10⁷ A/cm², a level that may enable the practical realization of a single-layer Rashba-induced magnetization switching memory.