DocumentCode :
1345864
Title :
Design and performance of a digitally based voltage controller for correcting phase unbalance in induction machines
Author :
Oyama, Jun ; Profumo, Francesco ; Muljadi, Edumard ; Lipo, Thomas A.
Author_Institution :
Dept. of Electr. & Comput. Eng., Wisconsin Univ., Madison, WI, USA
Volume :
26
Issue :
3
fYear :
1990
Firstpage :
425
Lastpage :
433
Abstract :
The case of unbalanced supply presents a uniquely difficult problem in motor applications since its causes are varied. In many situations a static starter utilizing back-to-back thyristors in series with the motor lines is already installed for the purpose of soft starting or for power factor improvement. An attractive low-cost solution for phase unbalance is simply to modify the control strategy of the static starter by adjusting the firing angles of the three thyristors pairs independently. In this manner, the series connected thyristors serve the function of unsymmetrical, variable supply impedances which can be used to balance the voltage across the motor phases. A new digital controller utilizing a static starter for balancing the phase currents of an induction motor operating with unbalanced supply is presented. Experimental results show a marked reduction in the current unbalance from approximately 40% to a few percent and clearly demonstrate the attractiveness of the new phase balancer
Keywords :
digital control; induction motors; machine control; starting; thyristor applications; voltage control; back-to-back thyristors; design; digital machine control; firing angles; impedances; induction machines; motor; performance; phase unbalance; static starter; unbalanced supply; voltage controller; Computer aided software engineering; Digital control; Helium; Impedance; Induction machines; Induction motors; Reactive power; Thyristors; Voltage control; Windings;
fLanguage :
English
Journal_Title :
Industry Applications, IEEE Transactions on
Publisher :
ieee
ISSN :
0093-9994
Type :
jour
DOI :
10.1109/28.55973
Filename :
55973
Link To Document :
بازگشت