DocumentCode
1350059
Title
3-D reconstruction of coronary arterial tree to optimize angiographic visualization
Author
Chen, S. James ; Carroll, John D.
Author_Institution
Div. of Cardiol., Univ. of Colorado Health Sci. Center, Denver, CO, USA
Volume
19
Issue
4
fYear
2000
fDate
4/1/2000 12:00:00 AM
Firstpage
318
Lastpage
336
Abstract
Due to vessel overlap and foreshortening, multiple projections are necessary to adequately evaluate the coronary tree with arteriography. Catheter-based interventions can only be optimally performed when these visualization problems are successfully solved. The traditional method provides multiple selected views in which overlap and foreshortening are subjectively minimized based on two dimensional (2-D) projections. A pair of images acquired from routine angiographic study at arbitrary orientation using a single-plane imaging system were chosen for three-dimensional (3-D) reconstruction. After the arterial segment of interest (e.g., a single coronary stenosis or bifurcation lesion) was selected, a set of gantry angulations minimizing segment foreshortening was calculated. Multiple computer-generated projection images with minimized segment foreshortening were then used to choose views with minimal overlapped vessels relative to the segment of interest. The optimized views could then be utilized to guide subsequent angiographic acquisition and interpretation. Over 800 cases of coronary arterial trees have been reconstructed, in which more than 40 cases were performed in room during cardiac catheterization. The accuracy of 3-D length measurement was confirmed to be within an average root-mean-square (rms) 3.5% error using eight different pairs of angiograms of an intracoronary guidewire of 105-mm length with eight radiopaque markers of 15-mm interdistance. The accuracy of similarity between the additional computer-generated projections versus the actual acquired views was demonstrated with the average rms errors of 3.09 mm and 3.13 mm in 20 LCA and 20 RCA cases, respectively. The projections of the reconstructed patient-specific 3-D coronary tree model can be utilized for planning optimal clinical views: minimal overlap and foreshortening. The assessment of lesion length and diameter narrowing can be optimized in both interventional cases and studies of disease progr- - ession and regression.
Keywords
angiocardiography; diagnostic radiography; image reconstruction; medical image processing; 105 mm; 15 mm; 3-D reconstruction; angiographic visualization optimization; arbitrary orientation; arterial segment of interest; bifurcation lesion; coronary arterial tree; disease progression; disease regression; gantry angulations; medical diagnostic imaging; multiple computer-generated projection images; radiopaque markers; segment foreshortening minimization; single coronary stenosis; single-plane imaging system; Angiography; Bifurcation; Catheterization; Computer errors; Image reconstruction; Image segmentation; Lesions; Three dimensional displays; Two dimensional displays; Visualization; Coronary Angiography; Coronary Disease; Coronary Vessels; Heart Catheterization; Humans; Image Processing, Computer-Assisted;
fLanguage
English
Journal_Title
Medical Imaging, IEEE Transactions on
Publisher
ieee
ISSN
0278-0062
Type
jour
DOI
10.1109/42.848183
Filename
848183
Link To Document