Title :
Ignition Time Measurements in Repetitive Nanosecond Pulse Hydrogen–Air Plasmas at Elevated Initial Temperatures
Author :
Yin, Zhiyao ; Takashima, Keisuke ; Adamovich, Igor V.
Author_Institution :
Dept. of Mech. & Aerosp. Eng., Ohio State Univ., Columbus, OH, USA
Abstract :
Ignition time is measured in premixed preheated hydrogen-air flows excited by a repetitive nanosecond pulse discharge in a plane-to-plane geometry. ICCD images of the plasma and the flame demonstrate that mild preheating of the fuel-air flow greatly improves plasma stability and precludes filament formation. At the initial temperatures of T0 = 100-200°C, hydrogen-air plasmas remain stable and uniform up to at least P = 150 torr, and ignition occurs in a large volume. In contrast, ignition in less uniform preheated ethylene-air plasmas occurs locally, near the electrode edges, with flame propagating toward the center of the plasma. Ignition time in hydrogen-air mixtures is measured at initial temperatures of T0 = 100-200°C, pressures of P = 40-150 torr, equivalence ratios of φ = 0.5-1.2, and pulse repetition rates of ν = 10-40 kHz. The results of ignition time measurements are compared with the predictions of the hydrogen-air plasma chemistry model, showing good agreement. Nitrogen emission spectra are used to measure time-resolved temperature in air and hydrogen-air plasmas. The results show that ignition begins at the plasma temperature of T ≈ 700 K and results in a rapid temperature rise. By turning off dominant plasma chemical radical generation processes in kinetic modeling calculations, while keeping discharge energy loading the same, it is demonstrated that ignition is driven by additional energy release in reactions of plasma-generated radicals with hydrogen. To determine if plasma-generated radicals may reduce ignition temperature, discharge pulse burst was terminated before the onset of ignition, and ignition delay time was measured versus plasma temperature at the end of the burst. Experimental ignition delay time is in reasonably good agreement with kinetic modeling calculations. The kinetic model predicts significant plasma-assisted ignition threshold temperature reduction at the- - present conditions compared to thermal ignition, up to ΔT = 180 K.
Keywords :
air; discharges (electric); flames; hydrogen; ignition; plasma chemistry; plasma diagnostics; plasma flow; plasma instability; plasma kinetic theory; plasma temperature; time measurement; ICCD image; discharge energy; frequency 10 kHz to 40 kHz; ignition time measurement; kinetic modeling; nitrogen emission spectra; plane-to-plane geometry; plasma chemical radical generation; plasma stability; plasma temperature; plasma-assisted ignition threshold temperature; plasma-generated radicals; preheated ethylene-air plasma; premixed preheated hydrogen-air flow; pressure 40 torr to 150 torr; repetitive nanosecond pulse discharge; repetitive nanosecond pulse hydrogen-air plasma; temperature 100 degC to 200 degC; thermal ignition; time-resolved temperature; Discharges; Ignition; Plasma measurements; Plasma temperature; Temperature measurement; Time measurement; Emission spectroscopy; ignition time; nanosecond pulse plasma; plasma assisted combustion;
Journal_Title :
Plasma Science, IEEE Transactions on
DOI :
10.1109/TPS.2011.2171508