DocumentCode
1424839
Title
Simulated and measured results from a Duroid-based planar MBG cavity resonator filter
Author
Hill, Michael J. ; Ziolkowski, Richard W. ; Papapolymerou, John
Author_Institution
Dept. of Electr. & Comput. Eng., Arizona Univ., Tucson, AZ, USA
Volume
10
Issue
12
fYear
2000
Firstpage
528
Lastpage
530
Abstract
A planar Microwave Band Gap (MBG) cavity resonator filter that is completely compatible with current commercial printed circuit board (PCB) fabrication techniques has been designed, fabricated and tested. This filter provides a 1.33% bandwidth passband response at 10.67 GHz with a corresponding insertion loss of 2.17 dB. Design considerations and equations are presented which demonstrate that the resonant frequency and Q of the resonator can be adjusted as desired.
Keywords
Q-factor; cavity resonator filters; microwave filters; passive filters; periodic structures; printed circuits; 10.67 GHz; 2.17 dB; PCB fabrication compatibility; PCB substrate; SHF; duroid-based cavity resonator filter; planar microwave band gap cavity resonator; quality factor adjustment; resonant frequency adjustment; Band pass filters; Bandwidth; Cavity resonators; Circuit simulation; Circuit testing; Fabrication; Microwave bands; Microwave filters; Printed circuits; Resonator filters;
fLanguage
English
Journal_Title
Microwave and Guided Wave Letters, IEEE
Publisher
ieee
ISSN
1051-8207
Type
jour
DOI
10.1109/75.895092
Filename
895092
Link To Document