Characteristic Comparison of the Superconducting Fault Current Limiter With Various Bypass Reactors

A resistive superconducting fault current limiter (SFCL) has two drawbacks-relatively higher impedance and longer recovery time than the requirement of the electric power system. A parallel-connected bypass reactor (BPR) can be a solution to both problems. As a stage of proof-of-concept, an SFCL comprised of an YBCO S/N switch and a Bi2223-BPR had been presented in the former paper. Although the previous one has shorter recovery time, the generated impedance after a fault was too low to satisfy the requirement of the power system. To apply the SFCL into the power system, the SFCL has proper impedance during the fault. Therefore, we proposed bypass reactors to achieve higher impedance than the previous one in this paper. The SFCLs with a bypass reactor were fabricated and short-circuit test with the SFCLs were conducted. The test results were compared in point of current limiting characteristics and recovery. This research would be applied to a conceptual design of BPR.