DocumentCode
1467628
Title
640 Gb/s All-Optical Regenerator Based on a Periodically Poled Lithium Niobate Waveguide
Author
Bogoni, Antonella ; Wu, Xiaoxia ; Nuccio, Scott R. ; Willner, Alan E.
Author_Institution
Integrated Res. Center for Photonic Networks & Technol., Consorzio Naz. Interuniv. per le Telecomun., Pisa, Italy
Volume
30
Issue
12
fYear
2012
fDate
6/15/2012 12:00:00 AM
Firstpage
1829
Lastpage
1834
Abstract
640 Gb/s all-optical ON-OFF keying signal regeneration based on nonlinearities in a periodically poled lithium niobate (PPLN) waveguide is demonstrated and characterized. The data are transferred from the distorted original optical time division multiplexing (OTDM) signal onto a high quality and locally generated 640 GHz clock by pump depletion simultaneously operating a wavelength conversion. The thresholding behavior and the saturation effect of pump depletion in the PPLN waveguide for low and high pump power values, respectively, allow for a noise compression on the wavelength-converted replica of the original signal. The use of a stable clock with a shorter pulsewidth also allows for a sort of sampling of the original OTDM frame in the bit time center, resulting in a pulse reshaping that eliminates all noise contributions on the pulse tails. This operation produces a reduction of the original time jitter of the signal. The sampling operation also results in a compression of the new OTDM frame pulses compensating for the residual chromatic dispersion effects. After having characterized the transfer function of the proposed regeneration scheme, we evaluate its effectiveness as a function of optical signal-to-noise ratio (OSNR), pulse broadening, and time jitter of the input signal. Regeneration performance is measured in terms of bit error rate (BER) and power penalty @ BER = 10-9. Error-free operation can be recovered and maintained over an input signal OSNR range of 8 dB. This results in a BER improvement up to several orders of magnitude, obtained when the input OSNR is reduced by 20 dB with respect to the baseline. The time jitter of input signals with original jitter values from 100 to 300 fs has been reduced of nearly one order of magnitude to values lower than 40 fs. We also demonstrate that a pulse broadening up to 20% of the original pulsewidth can be compensated. Finally, wavelength tunability of the regenerator input and output signal can be, in princi- le, guaranteed over the whole C-band and beyond.
Keywords
amplitude shift keying; error statistics; lithium compounds; optical noise; optical pulse shaping; optical pumping; optical repeaters; optical transfer function; optical tuning; optical waveguides; optical wavelength conversion; time division multiplexing; timing jitter; all-optical on-off keying signal regeneration; all-optical regenerator; bit error rate; bit rate 640 Gbit/s; bit time center; error free operation; frequency 640 GHz; noise compression; optical signal-to-noise ratio; optical time division multiplexing; periodically poled lithium niobate waveguide; power penalty; pulse broadening; pulse reshaping; pump depletion; residual chromatic dispersion effects; sampling; saturation effect; stable clock; thresholding behavior; time 100 fs to 300 fs; time jitter; transfer function; wavelength conversion; wavelength tunability; Clocks; Jitter; Optical distortion; Optical noise; Optical waveguides; Repeaters; Signal to noise ratio; Nonlinear optics; optical fiber communication; ultrafast optics;
fLanguage
English
Journal_Title
Lightwave Technology, Journal of
Publisher
ieee
ISSN
0733-8724
Type
jour
DOI
10.1109/JLT.2012.2189552
Filename
6168204
Link To Document