International comparison of a resistive divider at 100 kV DC

Author

Li, Yi ; Rungis, Juris ; Jing, Tao ; Su, Tsung-han ; Chen, I.P. ; Lee, Dennis ; Shimizu, K.

Author_Institution

Nat. Meas. Lab., CSIRO, Lindfield, NSW, Australia

Volume

50

Issue

2

fYear

2001

fDate

4/1/2001 12:00:00 AM

Firstpage

436

Lastpage

439

Abstract

Values of the voltage divider ratio of a DC high-voltage divider, built and characterized by the NML of Australia, were determined at the Productivity and Standards Board of Singapore, the Center for Measurement Standards of Taiwan, the Standards and Calibration Laboratory of Hong Kong, and Japan Electric Meters Inspection Corporation by the comparison method, under an APMP program. The resistance values of the NML divider were also determined in the participating laboratories. Good agreement was found between the measured average resistance ratio and the measured average voltage ratio. The relative voltage dependence of the dividers has also been established

Keywords

calibration; high-voltage techniques; thin film resistors; transfer standards; voltage dividers; voltage measurement; 100 kV; DC high-voltage divider; HV standards; average resistance ratio; average voltage ratio; calibration; international comparison; relative voltage dependence; resistive divider; thin film resistors; travelling divider; voltage divider ratio; Australia; Calibration; Electric resistance; Electrical resistance measurement; Laboratories; Measurement standards; Productivity; Standards Board; Voltage; Watthour meters;

fLanguage

English

Journal_Title

Instrumentation and Measurement, IEEE Transactions on

Publisher

ieee

ISSN

0018-9456

Type

jour

DOI

10.1109/19.918160

Filename

918160