Measurement of joint resistance of Bi-2223/Ag tapes using one-turn shorted coil

Author

Tanaka, Kazufbmi ; Ninomiya, Akira ; Ishigohka, Takeshi ; Kurahashi, Kiyoshi

Author_Institution

Graduate Sch., Seikei Univ., Tokyo, Japan

Volume

11

Issue

1

fYear

2001

fDate

3/1/2001 12:00:00 AM

Firstpage

3002

Lastpage

3005

Abstract

Considering the application of high T_c superconductor to power cables, the loss at conductor joint would be very important. Therefore, we have carried out a measurement of joint resistance of Bi-2223/Ag tapes at 77 K. A one-turn coil was wound by Bi-2223/Ag tape. Both ends of the tapes were overlapped and soldered to each other. The samples have different overlap-lengths. DC current is induced in the one-turn HTS shorted coil by energizing the excitation coil wound by copper wire closely located to the HTS coil. The magnetic flux density in the HTS coils was measured by a Hall element. From these data, we estimated the current induced in the HTS shorted coil. The decay of the persistent current in the coil was measured and the joint resistance was calculated. We examined the effect of the lapped part length on the joint resistance

Keywords

bismuth compounds; calcium compounds; composite superconductors; high-temperature superconductors; silver; strontium compounds; superconducting coils; superconducting tapes; 77 K; Ag; Bi-2223/Ag tapes; BiSrCaCuO; DC current; HTS coil; Hall element; excitation coil; high T_c superconductor; joint resistance; lapped part length; magnetic flux density; one-turn shorted coil; overlap-lengths; persistent current; power cables; Conductors; Copper; Electrical resistance measurement; High temperature superconductors; Power cables; Superconducting cables; Superconducting coils; Superconducting films; Wire; Wounds;

fLanguage

English

Journal_Title

Applied Superconductivity, IEEE Transactions on

Publisher

ieee

ISSN

1051-8223

Type

jour

DOI

10.1109/77.919694

Filename

919694