DocumentCode :
1519583
Title :
A 1000 V resistor for AC-DC voltage transfer
Author :
Klonz, Manfred ; Spiegel, Thomas ; Laiz, Héctor ; Kessler, Ernst
Author_Institution :
Phys. Tech. Bundesanstalt, Braunschweig, Germany
Volume :
48
Issue :
2
fYear :
1999
fDate :
4/1/1999 12:00:00 AM
Firstpage :
404
Lastpage :
407
Abstract :
The new design of a thin-film 100 kΩ/1000 V resistor on a thick AlN substrate with very high heat conductance results in a small resistor temperature of less than 4 K increase above ambient. As all the Joule heat is conducted through the substrate to the outside heat sinks, the inside electrostatic shield as well as the outer cylinder remain at ambient temperature. This design reduces the voltage coefficient of the AC-DC voltage transfer standard for the step-up from 300 V to 1000 V and frequencies from 1 kHz to 100 kHz
Keywords :
convertors; dielectric losses; high-voltage techniques; shielding; thin film resistors; transfer standards; voltage measurement; 1 to 100 kHz; 100 kohm; 1000 V; AC-DC voltage transfer standard; AlN; Joule heat; ambient temperature; dielectric losses; inside electrostatic shield; outer cylinder; outside heat sinks; planar design; small resistor temperature; thermal convertors; thick AlN substrate; thin film resistor; very high heat conductance; voltage coefficient; Coatings; Dielectric losses; Frequency; Heat sinks; Resistors; Substrates; Temperature sensors; Thermal resistance; Transistors; Voltage;
fLanguage :
English
Journal_Title :
Instrumentation and Measurement, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9456
Type :
jour
DOI :
10.1109/19.769611
Filename :
769611
Link To Document :
بازگشت