Expected quality factor of a simple tuned oscillator

A positive feedback system oscillating under self-sustained mode is shown to have an extremely high gain. Modeled as one port, the expected Q is much higher than the loaded Q-factor of the resonator. With just thermal noise present, random phase/frequency deviation is linear. Centered about the oscillator frequency ω₀, noise frequency on both sides is more amplified with decreasing separation distance. Ultimately, frequency pulling may result in synchronous locking with hysteresis, which occurs be cause a real oscillator displays a truncated limiting curve. Once locked onto a signal, smaller levels are ignored. A new approach to the design and characterization of a simple tuned oscillator is offered: According to the phenomenon of injection locking, there exists an expected quality factor relating the shape of the truncated limiting curve to an ideal curve. In this paper, synthesis and innovative analytical methods of academic interest are revealed: 1) application of the transducer loss method is revised to establish a new method for oscillator characterization; 2) a transparent method of normalizing a two-port network in the presence of white noise is developed; and 3) in quartz crystal controlled oscillators, characterization of the noise originating from an equivalent noise-resistance determined from parameter of the quartz crystal is proposed. It is shown that the two-port model can also be approximated on a one-port basis. In conclusion, a sample of closed form estimation of expected Q-factor order of magnitude of piezoelectric resonator oscillators is calculated.